L-AN Total Loss System Oil (Mechanical Oil)

理化性质:

Keywords:

Intermediate | Amine Antioxidants | Phenolic Antioxidants | Complex Antioxidant Blends | Pre-dispersed Masterbatches

Product Name:
L-AN Total Loss System Oil (Mechanical Oil)
Product Name:
Molecular formula:
Molecular weight:
CAS.NO:
Average molecular weight:
Physical and chemical substances:
Main component molecular formula:
NC.NO:
Viscosity grade:
Meet the standards:
Viscosity grade:
32#/46#/68#/100#/150#
Execution standard

Product Quality Standards

Product Description

This product is formulated using premium base oils, combined with a variety of advanced additives such as rust inhibitors, antifoaming agents, and antioxidants, all blended through cutting-edge manufacturing processes. Commonly known as mechanical oil, this fully drained system oil is primarily used in total-loss lubrication systems where there are no specific requirements for the lubricant.

Product Performance

Good oxidative stability;

Good lubrication performance to prevent component wear;

Technical Specifications

GB 433-89

Scope of Application

Suitable for lubricating total-loss systems as well as spindle, bearings, gears, and other low-load mechanical components that have no specific requirements for lubricants.

Technical indicators

Project

Quality standards

Experimental Method

32#

46#

68#

100#

150#

Kinematic viscosity (40°C), mm²/s 2/s

28.8–35.2

41.4–50.6

61.2–74.8

90-110

135–165

GB/T 265

Flash point (open cup), °C

150

160

160

180

180

GB/T 3536

Pour point, °C

-5

-5

-5

-5

-5

GB/T 3535

Moisture, %

Traces

Traces

Traces

Traces

Traces

GB/T 260

Mechanical impurities, %

None

None

None

None

None

GB/T 511

Copper Sheet Corrosion (100°C, 3h) / Grade

≤1

≤1

≤1

≤1

≤1

GB/T 5096

Instructions for Use and Precautions

According to equipment lubrication guidelines, select oil products with appropriate viscosity. During use and storage/transportation, prevent contamination by foreign objects, and strictly avoid mixing in mechanical impurities or water. Ensure the oil tank remains clean—when changing the oil, thoroughly flush both the tank and oil lines—and never mix it with oils of different types.

Storage Conditions

1. Packaged in 200L iron drums or 1000L IBC totes.

2. Store in a cool, well-ventilated area, away from fire sources and direct sunlight.

3. Recommendation: The maximum processing temperature should not exceed 70°C, and the long-term storage temperature must remain below 45°C.

Application areas

Application areas

More products

undefined

undefined

Welcome to leave a message or ask questions.

We will contact you within one business day. Please check your email.